Your warehouse sends parts to an outside workshop and receives assembled goods days later. Between those events, a buyer needs to answer two different questions. Which parts have left the warehouse, and how many finished units are actually ready to sell? Test an Odoo subcontracting setup with a clerk at dispatch and another at receiving, each working from their own document.
Choose a product whose components you supply
In this workflow your company sends its own components to the subcontractor and receives the assembled product back. A workshop that buys all the parts itself, or one that receives parts directly from another supplier, uses a different supply arrangement. Identify who physically sends each component before selecting a route.
In Odoo 20, enable subcontracting in Manufacturing settings. Set the workshop as a vendor for the finished item. On a bill of materials of type Subcontracting, identify that workshop, the finished quantity the recipe produces, and the component quantity per recipe. Agree the units of measure with both clerks. For the first run, use a single warehouse, a one-step receipt and a product with no scrap, alternatives or opening stock at the subcontractor.
Predict the movements before confirming the purchase
Fictional example. A furniture business orders six assembled tables. Each uses one top and four legs from the company’s warehouse. The warehouse starts with eight tops, 32 legs and no assembled tables. Put three checkpoints on paper before opening the order.
- At dispatch. Six tops and 24 legs must leave the warehouse. Two tops and eight legs remain on its shelves.
- At the workshop. Immediately after dispatch is recorded and before production is recorded, the subcontracting location should account for those six tops and 24 legs. No finished tables have been received.
- After full receipt. All six tables should be in warehouse stock. This example has no unused components at the workshop. The two tops and eight legs that stayed in the warehouse are still there.
Follow the transfer and receipt from the same order
Raise the purchase order for six assembled tables from the named workshop. In the Odoo 20 resupply workflow, confirmation creates a resupply order for components and a receipt for the finished item. Open both from the purchase order. Check that the first lists tops and legs with the intended destination and that the second lists tables. Comparing the two references now makes it easier to spot a purchase order for the wrong product.
Have the dispatch clerk count, send and validate the actual component transfer. Give receiving only the workshop’s delivery note and the purchase reference. When the tables arrive, the receiving clerk counts them and validates that quantity on the finished-product receipt. Follow the movements in Inventory’s Moves History and compare them with the three checkpoints. A warehouse with multi-step receipts may have additional internal transfers before the tables reach stock.
Repeat with a short dispatch
Start a fresh test with the same order and only 23 legs available for dispatch. Six tables require 24. Ask the clerk to record the actual shipment and show how the team finds the missing leg, who authorises sending it later, and which reference connects the follow-up to the original order. Use the team’s demonstrated handling of partial quantities as evidence. A shipping note for 24 legs when only 23 left is a failed test.
Keep the purchase, resupply and receipt references, counted quantities, and the remaining balance per location. For other factory handoffs, use the manufacturing implementation checklist. To test an outsourced operation with Lava, bring a sample bill of materials and a sketch of who sends what to whom.
